LCD Enclosure - Several Kinds Of Units
Ver PDF | Prever Artigo
by: JackJReynolds
Numero Total de Visualizações: 48
Número de Palavras: 640
Digital signage enclosures is available in several materials; observe why the different metals are used. Generally an LCD enclosure is made from mild steel and powder coated to supply the pertinent protection for digital signage, here the casing will be subjected to all kinds of weather from rain, snow, sleet and high temperatures, so make certain the enclosure you choose for digital outdoor signage protection has been hot dipped in zinc to stop rusting. LCD enclosure - Why Hot dipped? If the LCD enclosure is not hot dipped in a zinc wash, this compound forms a galvanised coat on the base metal that protects from rust attacking the steel. Then the steel LCD enclosure is then powder coated, the reason for this method is that if for some reason such as a vandal or hooligan tries to injure the housing and chips the top coat of paint, the base material is still protected by the galvanised coating, otherwise the base material will start to rust and the cabinet ultimately will have to be replaced before it should. So next time you are looking for a stainless steel LCD enclosure, ask them if it is hot dipped and get them to give you addition data, if they have to email you later, they obviously do not know their product and more than likely will not hot dip the enclosure. Stainless steel LCD enclosure. Now in some reasons, customers call for a stainless steel unit, this could be in a food surroundings or just used to present factory information systems, and the entire plant is washed down at the end of every working day. Stainless steel material is available in three categories Ferritic, Austenitic and Martensitic, these contain different compounds and there is only one that has the most Chromium (this is a corrosion stopper), so ask any potential what material their stainless steel is and if they do really manufacture them they will know right away. Nevertheless they are several LCD enclosure suppliers who buy in components from third world suppliers, getting the lowest priced product possible and assemble them, the challenge with this is they will have no control over the material used, so you have no idea and they cannot guarantee what material the item will be made from. So ask for test certificates for the Monitor enclosures was made from, so that you cans ee the original of the metal and safeguard your investment. When an outside dynamic marketing project is thought out and planned, frequently the hardware is protected, not just for the winter, but all through the year. For illustration, if the hardware was not cooled enough during the spring or summer the display and media player will simply cook inside the housing, this is why the cooling system that is supplied with any outside LCD enclosure is thermostatically controlled, some even have the possibility to send a message when a sudden rise in internal temperature to the av operator who can shut down the hardware remotely. Then on the other end of the year, when winter happens, we have to look at heating, so the better LCD enclosure manufacturers offer the heaters with a thermostatic control, so that the internal heater can start to heat the component inside before it gets to cold and causes untold harm. There are many manufacturers who provide a cooling system that is not thermostatically managed, delivering this is an optional extra, having said that you do have to question their experience in the industry as the most effective way is to cool the inside of the casing as and when required, not have a fan unit working all the time - this is not good for business or for the planet using unnecessary electrical power.
Sobre o Autor
LCD Enclosure Global provide a range of LCD enclosures that are specifically manufactured for outdor digital signage protection. Their LCD enclosure range covers screens from 17" to 80".
Rating: Sem votação